Energy efficiency retrofit
Energy efficiency retrofit product that can save an average of 15% kWh energy used by the compressor in air conditioning, refrigeration and heat pump systems (HVAC-R). Achieves savings using intelligent cycle optimization technology.
Use intelligent compressor optimization to save an average 15% kWh and give customers a payback in 12 to 36 months.
Air conditioning, refrigeration and heat pump (HVAC-R) units waste a lot of energy through natural inefficiency. Their compressors consume about 70% of the total energy used by the system.
The average building has about 35%of its total energy used up by these systems- and many businesses see much more of their energy bill coming from their cooling systems.
Works with any control system on these types of cooling units, including systems with any load profile, night set-back routine, non-demand related interruptions, demand limiting and demand response functionality.
Interfaces with existing controls and equipment, and installation can be completed in an hour without any system interruption or impact on controlled space conditions.
Natural pre-cooling cuts costs by over a third A relatively small investment that saves more than a third on your operational cooling costs is a rare opportunity. pre-cooling reduces your environmental footprint and, by realizing significant energy savings, also your AC running costs. pre-cooling proposition becomes even more attractive and profitable when the real long-term costs of industrial cooling systems are fully taken into account.
In spite of their obvious shortcomings, compressor-based AC systems will remain in use for many years to come. Natural pre-cooling, of the kind delivered, is by far the simplest and most effective way to achieve significant savings. By reducing peak demands with up to 60 percent, pre-cooling also provides welcome relief for overloaded power grids. Upgrade existing systems and lower energy use by 30 percent Compressor-based cooling and refrigeration systems are responsible for 50 percent of the world’s total electricity consumption. Especially during the warmest days, they waste enormous amounts of energy. Many countries struggle with the power demand surges caused by these widely-used cooling systems. Now there is pre-cooling to upgrade your existing system and cut down energy bills by 30 percent. pre-cooling creates a cool microclimate around your industrial cooling system , the highly efficient direct evaporative cooling pads developed and produced . In warm climates, can lower the inlet air temperature by as much as 25 °C (45 °F). Self-cleaning, made of inorganic materials and with the lowest possible air resistance, guarantees safe operations and maximum savings for many years. Adiabatic cooling of the ambient air before it enters the system is the fastest way to lower energy consumption. The steady supply of cold air to your condenser not only boosts efficiency, it also contributes to longer equipment lifetime and lower maintenance costs.
Refrigeration systems account for around 20% of the world’s energy consumption and we have considerable practical experience to demonstrate there is real potential to achieve dramatic reductions in energy costs – improve equipment performance and reliability – at the same time providing more accurate control of the temperature of stored food products.
Range of energy saving and temperature monitoring products designed to improve the efficacy of refrigeration systems.
They are used primarily in commercial applications.
Range of Chilled Unit Energy Savers will: